• Provides an analogue output from a radio telemetry T24 acquisition module
• Desktop and bulkhead mounting enclosure options provide simple 2 part screw terminal connections
• Configurable analog outputs of 0-10V 4-20mA, 0-20mA, ±10V, ±5V
• Update rate of up to 2000 per second
• Simple wireless configuration and calibration
• Desktop option up to 20m (65 ft) range. Industrial bulkhead mounting up to 200m (650 ft) range

The analogue output modules provide a configurable analog output for a single T24 radio telemetry acquisition module. The output can be selected from the pre-calibrated voltage and current ranges of 0-10Volts, ±10Volts, 0-5Volts, ±5Volts, 0-20mA and 4-20mA (All current outputs both sink and source).

LED indictors provide status indication of the condition of the radio link, remote battery life and remote sensor status.

These modules are configured and scaled using free T24 Toolkit software which runs on a PC connected to a T24 base station.

The industrial version is housed in an IP65 NEMA4 sealed enclosure and offers a digital input allows for zeroing of the incoming data value

This version also offers extended range over the desktop version.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee® . FCC, ETSI and IC approvals.

• T24-AO1 Product Sheet
• T24-AO1 Manual
• T24 Introduction
• T24 Technical Manual

• T24 Toolkit

Q: What Outputs are available?

A: The T24 AO1 (Analogue output) provides 0-10, +/- 10v, 0-5V, +/- 5V 0-20mA 4-20mA source and sink outputs.

Q: How many inputs can a T24-AO1 output?

A; Just one. Although the AO1 has multiple outputs, only one acquisition module can provide data to it.

Q: How does an input equate to the output?

A: Using the T24-TK (toolkit software) you can declare the upper and lower limits of an output for a given input.

Q: What is the difference between the T24-AO1 and T24-AO1i?

A: The modules are identical in functionality apart from the T24-AO1i is an IP65 enclosed version where the T24-AO1 is designed for desktop applications rather than industrial.

• Radio Telemetry Thermal printer with 57mm (2.244”) paper width
• Prints data from up to 8 acquisition modules or a handheld module
• User definable printed report page
• Surface mounting enclosure
• Simple wireless configuration
• Internal antenna delivers up to 200m (650 ft) range
• Real time clock (RTC) option available

This radio telemetry printer module will generate a user designed report which can contain values from up to 8 x T24 acquisition modules and optionally sum them. This module has proved ideal for generating receipts and reports from various wireless weighing applications.

Printing can be triggered by a button press or the arrival of specific data from an acquisition module or a handheld display module. The power supply requirements make this module ideal for in-vehicle mounting.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. ETSI, FCC and IC approvals.

The module is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station.

Internal antenna offers up to 200m (650 ft) range in an open field site

General Radio

• T24-PR1 Product Sheet
• T24-PR1 Manual
• T24 Introduction
• T24 Technical Manual

• T24 Toolkit

• Radio telemetry operated relay module
• Dual 240Vac 5A relay module for limit or window alarms for T24 acquisition modules
• Configurable latching, inversion and hysteresis
• Wide operating supply range
• Surface mounting enclosure
• Simple wireless configuration and calibration
• Internal antenna delivers up to 200m (650 ft) range
• Sealed to IP65 NEMA 4

This relay module offers 2 power relays each of which can be assigned a set point and is triggered from either a wireless single acquisition module or a summed group of up to 8.

Relays can be latched and a digital input or external command can be used to reset them. An alarm signal relay is operated if communications is lost or other selectable errors occur. This alarm output can be silenced by a contact free digital input or external command.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals.

The module is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station.

Internal antenna offers up to 200m (650 ft) range in an open field site.

• T24-RM1 Product Sheet
• T24-RM1 Manual
• T24 Introduction
• T24 Technical Manual

• T24 Toolkit

• Radio telemetry serial ASCII output gateway
• Drives displays, feeds data to data collections systems, loggers, printers, computers and PLCs etc
• Wide operating supply range
• User definable serial ASCII output
• Surface mounting enclosure
• Simple configuration and calibration
• Internal antenna delivers up to 200m (650 ft) range
• Water-proofed to IP65 NEMA 4

This module generates a serial output ASCII string which can include data from up to 8 x radio telemetry T24 acquisition modules as well as optionally sum them. The output is suitable for connecting to many serial input devices that require simple ASCII data.

The actual ASCII output can be designed by the user which can include free text or tokens which can represent real data. i.e. <V1> would be the value from input module 1 when the output is triggered.

The output of the device can be triggered by the reception of user specified data. i.e. data is only outputted when data is received from a specific acquisition module or when triggered from a handheld device.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals.

The module is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station.

Internal antenna offers up to 200m (650 ft) range in an open field site.

• T24-SO Product Sheet
• T24-SO Manual
• T24 Introduction
• T24 Technical Manual

• T24 Toolkit

Q: What does the serial output provide?

A: The serial output provides an ASCII string output of up to 8 values in a user formatted string.

Q: How can I display data using the T24-SO?

A: By combining the T24-SO with a serial display such as Mantracourt’s SerialDis unit a display can be created that updates as often the acquisition module transmits data.