• Collects data from and configures any T24 radio telemetry module
• USB, RS232 and RS485 interfaces
• Wide range power supply
• Up to 200m (650 ft) range
• Integral antenna
• Waterproofed to IP65 NEMA4

The industrial base station is required for the configuration of all of the T24 modules and is greatly simplified by the T24 Toolkit software for Windows supplied free of charge upon purchase. Data can also be captured by the base station from an unlimited number of T24 acquisition modules to provide a radio telemetry data logger.

The options of USB, RS232 or RS485 interfaces enables this base station to connect to a wide range of devices such as PCs, PLCs, OEM hardware etc.The internal antenna provides up to 200m (650 ft) range.

For software developers a standard Windows DLL and COM driver are available to enable data collection from T24 Acquisition modules.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio telemetry technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. ETSI, FCC and IC approvals.

External Supply Voltage Range

Storage Temperature Range

General Radio

• T24-BS Manual
• T24-BSu Product Sheet
• T24 Introduction
• T24 Technical Manual

• T24 Toolkit
• T24 24 Channel Logging

Q: What is the difference between the T24-SO Serial Output and T24 Base Stations?

A: The T24-SO gathers data from up to 8 acquisition modules and, on its serial output, provides a user configurable ASCII string. The output string can contain the summed value of the gathered data. This output can be used to drive serial displays, printers or to simply feed directly into a PC, PLC or other data acquisition systems.
The base stations communicate bi-directionally so are used to configure the devices as well as gather data. The communications protocol is binary and packet based and so requires processing to present the data to the application in a formatted manner.

Q: Can base stations integrate to other communications protocols?

A: Our SCADA software package Visual Link interacts with all of our devices
allowing a PC to enact the conversion. In addition, with the use of the .DLL and
COM driver provided with the T24 Tool Kit, users can create tunneling between the data provided by the base station to the PC and another communications protocols.

Q: Once an acquisition module has been configured, will it require regular connections to the base station?

A: No. Once an acquisition module has been configured it will remain stable for its lifetime providing its operating limits are not exceeded.

• Provides wireless data acquisition from T24 Acquisition Modules
• Configures any T24 Telemetry module via USB
• Powered from USB
• Up to 100m (325 ft) range
• Miniature desk or wall mounting enclosure
• NEW Software ! - Allows viewing of data from T24-SA, T24-VA or T24-IA and offers the ability to log to a CSV file

The USB base station is required for the configuration of all T24 modules and is greatly simplified by the free T24 Toolkit software for Windows supplied upon purchase. Data can also be captured by the base station from an unlimited number of T24 Acquisition modules to provide a wireless data logger.

The integral antenna offers up to 100m (325 ft) range in an open field site. An industrial base station (T24-BSi) is also available with a different antenna providing up to 200m (650 ft) range. This device also offers RS232 and RS485 interfaces.

For software developers, a standard Windows DLL and COM driver are available to enable data collection from T24 acquisition modules.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. ETSI, FCC and IC approvals.

General Radio

• T24-BS Manual
• T24-BSu Product Sheet
• T24-Bsu 3d Drawings
• T24 Introduction
• T24 Technical Manual

• T24 Toolkit
• T24 24 Channel Logging
• T24 Data Provider Viewer + Logger

Q: What is the difference between the T24-SO Serial Output and T24 Base Stations?

A: The T24-SO gathers data from up to 8 acquisition modules and, on its serial output, provides a user configurable ASCII string. The output string can contain the summed value of the gathered data. This output can be used to drive serial displays, printers or to simply feed directly into a PC, PLC or other data acquisition systems.
The base stations communicate bi-directionally so are used to configure the devices as well as gather data. The communications protocol is binary and packet based and so requires processing to present the data to the application in a formatted manner.

Q: Can base stations integrate to other communications protocols?

A: Our SCADA software package Visual Link interacts with all of our devices
allowing a PC to enact the conversion. In addition, with the use of the .DLL and
COM driver provided with the T24 Tool Kit, users can create tunneling between the data provided by the base station to the PC and another communications protocols.

Q: Once an acquisition module has been configured, will it require regular connections to the base station?

A: No. Once an acquisition module has been configured it will remain stable for its lifetime providing its operating limits are not exceeded.